.jpeg)
This config is support for all huawei olt
Let’s start adding a new ONT. First, connect via telnet or console to the Huawei SmartAX MA5683T.
After entering the login and password, we will go into configuration mode:
- enable
- config
- display ont autofind all ( for looking new ont )
- interface gpon 0/5
- ont add 4 sn-auth ************* omci ont-lineprofile-id 204 ont-srvprofile-id 204 desc madankc
- quit
- display service-port next-free-index
- service-port 94 vlan 104 gpon 0/5/4 ont 0 gemport 1 multi-service user-vlan 104 tag-transform translate
Now ont added successfully and don't forget to save the configuration .
- save
****** All red letters are changeable. ****
All the commands used in the photo.
- enable
- config
- display ont autofind all
- interface gpon 0/5
- ont add 4 sn-auth ************* omci ont-lineprofile-id 204 ont-srvprofile-id 204 desc madankc
- quit
- display service-port next-free-index
- service-port 94 vlan 104 gpon 0/5/4 ont 0 gemport 1 multi-service user-vlan 104 tag-transform translate
