.jpeg)
I’ll give you an example of viewing information about ONT (ONU) on EPON OLT BDCOM P3310C, on other models is essentially the same.
Connect to OLT and go into configuration mode:
enableconfig
To view the ONU list, use the commands:
show epon onu-informationshow epon active-onushow epon inactive-onu
Example of viewing MAC addresses on a port or ONU:
show mac address-table interface EPON0/1show mac address-table interface EPON0/1:5show mac address-table brief
View the optical power that comes from the OLT to the ONU (ONU RX):
- show epon interface ePON 0/1:5 onu ctc optical-transceiver-diagnosis
View the optical power that comes from ONU to OLT (OLT RX):
|
View ONU models and firmware versions:
show epon onu-software-versionshow epon onu-software-version interface EPON 0/1
View description and status of interfaces:
- show interface brief
ONU ethernet port status and viewing statistics:
show epon interface epON 0/1:1 onu port 1 stateshow epon interface epON 0/1:1 onu port 1 statisticsshow epon interface epON 0/1:1 onu mac address-table
Also you can see in the saved and active OLT configuration which ONUs are registered:
show configurationshow running-config
ONU reboot example:
