Adding ONU with trunk port on BDCOM

 I will give an example of setting the trunk port on the EPON ONU connected to the BDCOM OLT.

Suppose a single-port ONU is already connected and registered (228 VLANs without a tag):

I will give an example of setting the trunk port on the EPON ONU connected to the BDCOM OLT. Suppose a single-port ONU is already connected and registered (228 VLANs without a tag): 1 2 interface EPON0/3:7   epon onu port 1 ctc vlan mode tag 228 priority 0 And we need to register several VLANs with a tag, then we will execute: 1 2 interface EPON0/3:7   epon onu port 1 ctc vlan mode trunk 1 207,226,228 Where 1 is a VLAN without a tag, since I do not need it, I specified standard 1, and after a space, you can list all the necessary VLANs with the tag. And also do not forget to specify the desired VLANs on the Uplink and EPON ports of BDCOM: 1 2 3 4 5 6 7 8 9 interface GigaEthernet0/5 switchport trunk vlan-allowed 207,226,228 switchport trunk vlan-untagged none switchport mode trunk interface EPON0/3 switchport trunk vlan-allowed 207,226,228 switchport trunk vlan-untagged none switchport mode trunk