Adding ONU with trunk port to BDCOM OLT

I will give an example of setting up a trunk port on an EPON ONU connected to a BDCOM OLT.

Let's say a single-port ONU is already connected and registered (228 VLANs without a tag):

• interface EPON0/3:7
• epon onu port 1 ctc vlan mode tag 228 priority 0

And we need to register several VLANs with a tag, then we will execute:

• interface EPON0/3:7
• epon onu port 1 ctc vlan mode trunk 1 207,226,228

Where 1 is a VLAN without a tag, since I don’t need it, I specified the standard 1, and after a space, you can list all the necessary VLANs with a tag.

And also do not forget to specify the necessary VLANs on the Uplink and EPON BDCOM ports:

• interface GigaEthernet0/5
• switchport trunk vlan-allowed 207,226,228
• switchport trunk vlan-untagged none
• switchport mode trunk

And

• interface EPON0/3
• switchport trunk vlan-allowed 207,226,228
• switchport trunk vlan-untagged none
• switchport mode trunk

Trunk Mode is useful for office networking and cctv camera 

Read Also:

• BDCOM How to reboot ONU

• BDCOM OLT All Commands